Basic Info.
Model NO.
Radio frequency card prepaid water meter
After-sales Service
18-Month After-Sale Service
Warranty
18-Month After-Sale Service
Application
Civil, Industrial
Medium Pressure
General Water Meter
Work Environment
Dry Water Meter
Stucture
Intelligent IC Card
Transport Package
Customized When MOQ Is 1000PCS
Product Description
1. Product introductionThe LXSY radio frequency card prepaid water meter complies with the national standard GB/T778.1.2.3-2007 "Measurement of water flow in closed pipes, drinking cold water meter and hot water meter" and the new standard for urban construction industry products CJ/T133-2012 "IC Car cold water meter" and the factory inspection procedures implement JJG162-2009 "cold water meter".
The radiofrequency card prepaid smart water meter is the latest high-tech mechatronics smart water meter developed by our company with advanced microcomputer
A highly intelligent instrument composed of control technology as the core and non-contact smart card technology as the information transmission medium. It is a highly intelligent product that integrates functions such as prepayment, automatic measurement, status alarm and prevention of improper use. It has the characteristics of accurate measurement, reliable performance, compact and reasonable structure. The meter is based on a rotary-wing water meter and is equipped with a new type of low-power, high-torque output non-pressure loss motor control valve, microcomputer controller and radiofrequency card operating system. The use of advanced encryption technology to implement one meter and one card ensures the safety and reliability of user data. Product performance indicators conform to the national standard GB/T778.1.2.3-2007 and the industry-standard CJ/T133-2001 of the Ministry of Construction, which can be applied to the measurement and charging of water for residences, enterprises and institutions. The use of this product has changed the traditional way of water management, changing from "water use first, pay later" to "pay first, use the water later", which greatly facilitates the management of residential property management departments and water management departments.
2, Main performance:| Prepayment function: the user fills the water first and then uses it, and the arrears automatically shut off the valve and stops the water. |
| Display synchronization function: the liquid crystal display and the mechanical part display are synchronized, even if the circuit is faulty, the liquid crystal cannot display, you can refer to the mechanical display. |
| Prompt alarm function: battery Undervoltage, insufficient available water, strong magnetic interference and other fault information will prompt an alarm on the LCD. |
| Data upload function: Every time the user buys water, the relevant information will be brought back to the management system so that the management party can understand the user's water usage and meter status. |
| Valve self-maintenance function: the valve rotates regularly to ensure the flexibility of the valve. |
| Anti-hoarding function: The lower limit of recharge can be flexibly set through the software to prevent users from hoarding water. |
| Anti-drip function: cooperate with an anti-drip base meter to realize the anti-drip function. |
| Easy to replace the battery: There is a cover specially designed to replace the battery on the back of the water meter. It is particularly convenient to replace the battery. Batch replacement of batteries is no longer a problem for the water management department |
| Q3/Q1=100 Q2/Q1=1.6 |
| Project | Technical parameter |
| Nominal diameter DN(mm) | 15 | 20 | 25 |
| Overload flow 1.25Q3(m³/h) | 3.125 | 5 | 7.875 |
| Common flow Q3(m³/h) | 2.5 | 4 | 6.3 |
| Boundary flow Q2(m³/h) | 0.04 | 0.064 | 0.1 |
| Minimum flow Q1(m³/h) | 0.025 | 0.04 | 0.063 |
Dimensions(mm)
(L*W*H) | 165*86*112 | 195*86*115 | 230*86*115 |
| Connection thread | G1/2 | G1 | G1 ¼ |
| Maximum flow reading (m³) | 99999 |
| Level of accuracy | Level 2 |
| Pressure loss | ≤0.063 MPa (under common flow) |
| Nominal pressure(MPa) | ≤1.0MPa |
| Conditions of Use | The medium temperature of cold water meter: 0ºC~30ºC, relative temperature <93% |
| Battery type and voltage | ER18505 lithium battery 3.6V |
| Battery working time | ≥6+1 years (below DN25) |
| Installation method | Horizontal installation |
| Display digits | 6 digits |
a. Overload flow Q4-the maximum use flow of the water meter in a short time without damage.
b. Common flow rate Q3-the best flow rate of the water meter under normal working conditions.
c. Boundary flow Q2-the flow rate at which the flow range is divided into two areas.
d. Minimum flow Q1-the minimum flow that requires the water meter to give the indicated value within the maximum allowable error limit.
e. Measurement error:
a. From including the minimum flow to the low zone, not including the boundary flow: ±5%.
b. From the high zone including the boundary flow to the overload flow: ±2%.
4, installation instructions| 1. For newly installed pipelines, the sand, silt, hemp and other debris in the pipeline must be cleaned before installing the meter to avoid malfunction of the water meter. |
| 2. The water meter specification should be based on the usual flow rate, and the diameter of the water meter cannot be determined by the diameter of the pipe alone. The water meter should not pass corrosive liquids, and the cold water meter should not pass hot water. |
| 3. When the water meter is installed, the direction of the arrow on the case must be consistent with the direction of the water flow, and the horizontal water meter must be installed horizontally. The direction of water flow of a vertical water meter must be bottom-up. The installation location of the water meter should be a place that can avoid exposure to the sun, and is convenient for disassembly and observation. In winter, heat preservation measures should be taken. |
| 4. When installing a water meter at the water inlet of the boiler, a check valve must be installed to prevent the return of hot water and steam from damaging the water meter. |
| 5. It is strictly forbidden to put anything above the water meter. Pay attention to moisture and humidity, and it is strictly forbidden for water to penetrate into the water meter controller to damage the control system. The system affects the normal use of users. |
| 6. When installing the water meter, pay attention to the connection length of the water meter. When the distance between the pipes at both ends exceeds the connection length of the water meter, the distance between the pipes should be corrected to meet the connection length of the water meter. And the damage to the connecting nut; if the pipes at both ends of the water meter are not on the same axis, other ways should be used to correct the pipes on the same axis to meet the installation dimensions of the water meter. |
| 7. For accurate measurement, the tap should be higher than the water meter. |
| 8. The water meter should not be directly connected to the pipeline. The water meter and the pipeline should be connected by connecting pipes, sealing gaskets, and connecting nuts. |
| When installing, do not use force to pull it hard to avoid twisting the case. |
| 9. When installing a water-saving and energy-saving water meter, it is necessary to use a matching special pipe joint at the water inlet to reduce the rotation of the water meter caused by water pressure fluctuations. |
| 10. As the installation is not carried out in strict accordance with the installation precautions, the water meter or its accessories are damaged, and all losses shall be borne by the installer. |
factory view:
come and contact me for more details:
Address:
No. 19 Huancheng East Road, Liushi, Yueqing, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Security & Protection
Company Introduction:
Zhejiang Wangjia Electric Technology Co., Ltd. is a production-oriented and independent R & D manufacturer located in Wenzhou, Zhejiang Province. Established in 2012, as a factory, we can flexibly cooperate with customers′ time arrangement, output requirements, quality control, appearance requirements and provide OEM services. Complete production line, high matching production and technical cooperation are our greatest advantages. In addition, we can provide reasonable manufacturer prices to ensure 18 months of after-sales service and damage replacement service within a certain range. The company has always adhered to the concept of "people-oriented, attentive service", the pursuit of perfect quality and meeting customer requirements are our primary production objectives and the direction of our sustainable operation.
Our main products are: Electricity meters, water meters, electric energy meters, low-voltage components, including dual power automatic transfer switches, overvoltage and undervoltage protectors, control protection switches, fire power monitors, fire detectors, etc. We have more than 20 years of industry experience and more than 9 years of production experience. We have sales outlets all over the country, And there are cooperation cases with Southeast Asia, South America and other countries.
Give us a chance to understand and cooperate with each other.
){kind=link}